T-45A CR-01
BI/RI Course Rules
b.
VFR Departure:
(1) Notify Departure Control when leaving their
frequency; monitor VFR common
308.2/BTN 25
(2) Maintain runway heading until passing
2,000 ft MSL or 4 DME (noise abatement)
(3) Request flight following
2.
IFR
NOTE: IFR procedures are used when departing to
the local VFR working area when field weather is
less than VMC.
a.
Contact clearance delivery and request X-RAY
Sg 4, fr 7
TWO departure to the local VFR area
X-Ray Two Departure
b.
Proceed IFR via the X-RAY Two LID to the local
VFR area and "CANCEL" when VFR
V.
Recovery 1.1.2.2, 1.1.2.2.4.1, 1.4.20.1
Sg 5, fr 1
Lesson Organization
NOTE: When contacting Kingsville Approach for recovery,
aircrew should state, "Kingsville Approach, call sign, radial/
DME from NQI, coded recovery, and current ATIS."
NOTE: Kingsville Approach may request aircrew to "IDENT,"
to confirm aircraft position. After initial contact, aircrew
should advise Approach if any deviation from normal coded
recovery, such as low initial, straight-in, or 360-degree turns
for altitude reduction, is desired.
A.
VFR
1.
Attempt to contact Kingsville Approach Control at
least 25 miles from the airfield for TOPS VFR radar
service to the VFR traffic pattern
NOTE: VFR recoveries apply only to aircraft returning
from the alert areas below the MOA or airspace within
(3-03) Original
Page 1-19
Previous Page
