UJPT, E2-C2, ADV, & IUT RIFP-01
Introduction to Radio Instruments
Sg 10, fr 3
Sg 10, fr 2
Outbound Leg
INTRODUCTION TO RADIO INSTRUMENTS
(DME) Turn Point
Abeam
*
SID procedures
Holding Side
*
Radial intercept procedures
Outbound
Outbound
Fix End
End
*
Indications of station passage
Inbound
Reciprocal
*
TACAN/VOR DME arc procedures
Holding
Non-Holding Side
Holding
Course
*
Voice Procedures
Fix (DME)
*
Ground speed computation procedures
*
Wind drift correction procedures
(a) Standard Pattern : Right Turns (Illustrated)
*
Pt-to-Pt procedures
(b) Nonstandard Pattern : Left Turns
*
Direct to a NAVAID
*
VOR-TACAN/VOR DME holding procedures
STANDARD HOLDING PATTERN (TACAN)
Sg 10, fr 3, pg 3
Sg 10, fr 3, pg 2
Outbound Leg
Timed Turn Point
OUTBOUND 090
ABEAM
GENERAL HOLDING
INSTRUCTIONS
Hold East
Denver VOR
090 Radial
HOLDING SIDE
INBOUND 270 HOLDING COURSE
R-090
HOLDING FIX
(Denver VOR)
NONHOLDING SIDE
TACAN HOLDING
NON-DME HOLDING PATTERN
X.
VOR - TACAN/VOR DME holding procedures 2.7.5.1.6.1, 2.7.5.2.4.1
NOTE: Instructions for holding may be published on an enroute chart or as an
integral part of an approach. Published holding instructions may be amended at
any time by ATC or provided by ATC when no published instructions exist. In the
absence of holding instructions and in a situation where holding is necessary, the
pilot is expected to enter a standard holding pattern.
A. Holding clearance
1.
Direction of holding from the fix (e.g., W, NE, E)
2.
Radial and DME of the holding fix
(8-97) Change 1
Page 1-31
Previous Page
