UJPT, E2-C2, ADV, & IUT RIFP-01
Introduction to Radio Instruments
Sg 10, fr 9
Heading Index
Ho
ld
i
ng
R
ad
ia
l
DIRECT ENTRY (Standard)
3.
Direct - Perform direct entry if holding radial is outside an area
of 110 degrees (to the left) and 70 degrees (to the right) of
heading
a.
At holding fix, turn to the outbound holding heading on the
pattern side of the fix
b.
Note time or DME
c.
Set holding course on HSI
d.
After desired time or DME is reached, turn in direction of
holding radial to intercept inbound holding course
e.
Return to holding fix
NOTE: When holding utilizes a timed pattern at altitudes at or
below 14,000 ft MSL, the pattern inbound leg is 1 minute.
Above 14,000 ft MSL, the inbound leg is 1.5 minutes.
NOTE: Timing outbound for all holding is commenced wings
level or abeam, whichever occurs last. Timing inbound is
commenced wings level inbound on intercept or on course.
(8-97) Change 1
Page 1-36
Previous Page
