UJPT, E2-C2, ADV, & IUT RIFP-01
Introduction to Radio Instruments
Sg 9, fr 2
INTRODUCTION TO RADIO INSTRUMENTS
*
SID procedures
*
Radial intercept procedures
*
Indications of station passage
*
TACAN/VOR DME arc procedures
*
Voice Procedures
*
Ground speed computation procedures
*
Wind drift correction procedures
*
Pt-to-Pt procedures
*
Direct to a NAVAID
*
VOR-TACAN/VOR DME holding procedures
IX. Direct routing 2.7.6.6.1
NOTE: ATC occasionally amends a clearance, or you can request direct
routing from ATC.
A.
Tune and identify station
B.
Turn in shortest direction to place bearing pointer used under HSI
heading index
C.
Rotate course set knob to center the CDI on the course pointer with
a TO indication
D.
Note the course and maintain a wind corrected heading that will
track the inbound course selected, make heading corrections for
wind drift as necessary
COMMON ERROR: Homing on station instead of proceeding direct
on a set course.
(8-97) Change 1
Page 1-30
Previous Page
