UJPT, E2-C2, ADV, & IUT RIFP-01
Introduction to Radio Instruments
Sg 8, fr 3, pg 1
Sg 8, fr 2
INTRODUCTION TO RADIO INSTRUMENTS
30 DME
R-090
*
SID procedures
*
Radial intercept procedures
090
0600
*
Indications of station passage
COURSE
RANGE
*
TACAN/VOR DME arc procedures
*
Voice Procedures
60 DME
*
Ground speed computation procedures
*
Wind drift correction procedures
*
Pt-to-Pt procedures
R-180
HDG
CRS
*
Direct to a NAVAID
*
VOR-TACAN/VOR DME holding procedures
POINT-TO-POINT NAVIGATION PROCEDURE
VIII. TACAN/VOR DME point-to-point navigation 2.7.5.1.3.1
NOTE: Use this procedure to fly from one TACAN fix to another via a
direct track. If ATC clears you direct to the fix, you may be radar-
vectored or required to use point-to-point navigation.
A.
Tune and identify the station
B.
Visualize HSI compass card as compass rose with station at center
C.
Picture fix having greater distance from station on its radial at
outside edge of HSI compass card
D.
Visualize fix with lesser distance (determined from previous step) at
a proportional distance from center of HSI on its radial
NOTE: The aircraft is always positioned on the tail side of the
applicable navigation pointer. Where depends on the distance of the
aircraft from the station when compared to the distance of the
point-to-point fix relative to the station.
E.
Connect two fixes with imaginary line or with aid of straight edge
(8-97) Change 1
Page 1-28
Previous Page
