CNATRAINST 1542.153A
12 March 2004
BEHAVIOR STATEMENT
STANDARDS
12.
Training Area Maneuvers
● Begins with initial
● Executes all maneuvers IAW NATOPS and
pitch and power
FTI.
setting and ends
● Turn pattern/Steep turns: Maintains
when aircraft is
100 feet, 5 bank, 10 knots, roll
stabilized in
out 5.
straight-and-level
● Approach to stalls/full stall:
flight, on climb
(a) minimizes altitude loss,
profile (Vx or Vy),
(b) avoids secondary approach to
or in position for
stall indications,
the next maneuver.
(c) maintains smooth, controlled
recovery.
● Slow flight: Maintains +5/-0 knots,
100 feet.
13.
Holding
● Begins when crossing
● Enters and maintains holding IAW
the holding fix and
NATOPS, FTI, and the FAR/AIM.
the holding pattern
for a subsequent fix
or the approach.
14. High Altitude Approach (Penetration)
● Begins when crossing
● Complies with all altitude
the high IAF and
restrictions.
ends at the FAF.
● Maintains airspeed IAW FLIP, NATOPS,
and FTI.
15.
Precision Approach
● Begins when at the
● ILS approach: Maintains 1 dot width
IAF or on radar
of localizer and glideslope.
vectors, cleared for
● PAR approach: Does not exceed "well
the approach and
above/below glidepath" or "well
intercepting
left/right of course" and complies
glidepath on a
with the controller's instructions in
published approach
a timely manner.
procedure.
● Maintains +5/-0 knots of approach
● Ends at the
airspeed.
transition to
landing or applying
power to execute a
missed approach/
waveoff.
IX-7