T-45C TS & ADV BIFP-08
GCA/ILS Procedures
(2) Execute missed approach if
runway environment not in sight or
you determine that a safe landing
is not possible
3.
Scan
a.
Maintain course and glidepath
(1) Use azimuth deviation needle and
CDI course deviation line to
maintain localizer course
(2) Use glideslope deviation needle to
establish glidepath
b.
Monitor attitude and performance
Sg 7, fr 6, pg 3
instruments
(1) Cross-check vertical velocity, A/S,
and AOA
(2) Monitor barometric altimeter for
decision height (DH)
COMMON ERROR: Fixating on
the azimuth and glideslope
deviation needles while neglecting
attitude and performance
LOCALIZER BACK COURSE
instruments.
APPROACH PROCEDURE (PLAN VIEW)
COMMON ERROR: Fixating on
Sg 7, fr 6, pg 4
azimuth and glideslope deviation
needles, and thus dropping
altitude out of scan and
descending below minimums.
LOCALIZER BACK COURSE
APPROACH PROCEDURE
(PROFILE VIEW)
(4-01) Original
Page 8-37
Previous Page
