Engine Start Procedures
T-45A UJPT, E2-C2, ADV, & IUT Eng-24
(4) Full forward: operates engine at
maximum- rated thrust (MRT) or
full throttle
NOTE: Raising finger lift with
throttle above "mid-range" position
will lock throttle in position to
prevent accidental shutdown of
engine.
B.
Indicators
Sg 1, fr 6
1.
EGT indicator: indicates exhaust gas
temperature in degrees centigrade
2.
speed in percent rpm
3.
FUEL FLOW indicator: indicates rate of
ENGINE INSTRUMENTS
fuel flow to engine combustion chamber in
AND INDICATORS
pounds per hour
4.
voltage
5.
GTS advisory light: when illuminated,
indicates gas turbine air producer has
attained idling speed prior to engine start
6.
ROTATION advisory light: when
illuminated, indicates a low pressure (N1)
shaft speed of 100 rpm or greater in the
correct direction of rotation
NOTE: The same signal that is used by
ECA to illuminate ROTATION advisory light
igniters).
7.
OIL PRESS warning light: when
illuminated, indicates an oil pressure
(8-03) Original
Page 24-7
Previous Page
