T-45C IUT BIFP-03
GCA Procedures
e.
MFD’s configured
(1) ADI
(2) HSI
(3) Low altitude warning (LAW) - SET
(4) HUD
2.
Downwind leg
a.
Procedure
(1) 200 KIAS, clean
(2) Assigned altitude
b.
Control: straight and level flight
3.
Base leg
a.
Procedure
(1) Maintain assigned base leg
altitude
(2) Transition to landing
configuration––gear and flaps/slats
down
NOTE: 1/2 flaps may be used
unless full flap landing planned.
(3) Perform landing checklist
(4) Maintain 150 KIAS until within
10 nm and 30 degrees of Final
Approach Course (FAC), then slow
to on-speed
(5) Do not slow below 150 KIAS until
landing checklist is complete
(4-01) Original
Page 3-7
Previous Page
