Flight Controls
T-45A UJPT, E2-C2, ADV, & IUT Eng-11
b.
RUDDER PEDAL ADJUST knob
Sg 2, fr 11
(6 Overlays)
(1) Location: panel assembly
attached to control support struts,
forward of control stick in both
cockpits
(2) Function: adjusts pedals to
accommodate leg reach
c.
Toe guide
RUDDER PEDAL ADJUST KNOB
(1) Location: metal strip attached
across center of each rudder pedal
(2) Function: placing feet in the
catapult position (tip of boot under
rudder pedal toe guide) will
prevent inadvertent wheel brake
actuation during catapult launch
WARNING: The toe guide serves only
as a reminder to the pilot of correct foot
positioning for catapult launches.
Failure to maintain correct foot position
throughout the catapult stroke may
result in a blown tire due to inadvertent
brake application.
d.
RUDDER TRIM indicator
Overlay 1
Rudder Trim Indicator
(1) Location: left console forward of
throttle quadrant, below AILERON
trim indicator in both cockpits
(2) Function: displays position of
rudder trim
e.
RUDDER TRIM knob
Overlay 2
Rudder Trim Knob
(1) Location: on left console, directly
adjacent to STBY STAB TRIM
switch in both cockpits
Page 11-14
(8-03) Original
Previous Page
