T-45C TS, ADV, & IUT RIFP-03
TACAN and VOR Holding Procedures
C.
Direct - Perform direct entry if holding radial is outside an
area of 110 degrees (to the left) and 70 degrees (to the
right) of heading
1.
At holding fix, turn to the outbound holding heading
on the pattern side of the fix
2.
Note DME or time wings level or abeam whichever
occurs last
3.
Set in holding course on HSI display
4.
After desired time or DME is reached, turn in
direction of holding pattern to follow the holding
pattern and intercept inbound holding course
5.
Return to holding fix
NOTE: When holding utilizes a timed pattern at
altitudes at or below 14,000 MSL the pattern
inbound leg is 1 min. Above 14,000 MSL the
inbound leg is 1.5 min.
NOTE: Timing outbound for all holding is
commenced wings level or abeam, whichever
occurs last. Timing inbound is commenced wings
level inbound on intercept or on course.
IV. Maintaining holding 2.7.5.1.6.1, 2.7.5.2.4.1
A.
Distance
1.
DME length
a.
Published
b.
Specified by controller
c.
May be requested by pilot
Page 3-7
(5-99) Original
Previous Page
