T-45C TS, ADV, & IUT CO-03
Multi-Function Display and Navigation System Operation
D. Waypoints Program
1.
A maximum of eleven waypoints can be
entered, ten tactical waypoints plus
waypoint zero with waypoint zero reserved
for home plate
2.
Waypoint data entry: waypoints can be
Fig 6: Waypoint Data Display
programmed manually from the waypoint
data display or transferring waypoints from
the mission data loader to a tactical
waypoint from the GPS data display
a.
Manual waypoint data entry is done on
the waypoint DATA display
(1) Press LAT, LONG, ELEV or MVAR
to enable the scratchpad and enter
data using the HUD data entry
panel
(2) A N or S must be entered first
when entering latitude
(3) A W or E must be entered first
when entering longitude and
magnetic variation
(4) A positive sign is required for
positive elevations
b.
Transferring waypoint data from the
DEU to an active waypoint is done on
the GPS DATA display
(1) The GPS data page allows you to
Fig 7: GPS Data Display
select from up to 200 waypoints
stored in the MDL. The first 15
waypoints are transferred to the
DEU on power up.
(2) Select the desired waypoint
(10-99) Original
Page 3-7
Previous Page
