T-45C TS, ADV, & IUT CO-03
Multi-Function Display and Navigation System Operation
b.
DEP data entry: select BNGO or LAW
Fig 5: HUD BINGO Fuel Entry
(1) Scratch pad with current LW or BF
setting displayed
(2) If entered data is not valid it will
flash -- press CLR and reenter
LAW or BNGO data
(3) The entered number will be
rounded down to 100 pound for
BINGO or 10 feet for LAW
increments when ENT is pressed
C. Compare MFD displays with standby
instruments
1.
Compare the heading on the ADI, HSI and
HUD with the standby compass
2.
Compare the attitude on the ADI and HUD
with the standby attitude indicator
3.
Compare the airspeed on the ADI and HUD
with the standby airspeed indicator
NOTE: The minimum airspeed recognized
and displayed by the DEU on the ADI and
HSI is 50 knots.
4.
Compare the altitude on the ADI and HUD
with the standby altimeter
NOTE: Set the standby altimeter to field
barometric pressure. Ensure that the error
is not more than +/- 75 feet. The standby
altimeter also sets the barometric pressure
for the DEU.
5.
The BIT display is checked for the results of
the power-up BIT
Page 3-6
(10-99) Original
Previous Page
