T-45C TS, ADV, & IUT CO-03
Multi-Function Display and Navigation System Operation
(3) Select the desired waypoint in the
GPS waypoints displayed or select
another page for more GPS
waypoints
(4) When the desired GPS waypoint is
in the GPS waypoint data block
select XFER to transfer the data to
the active waypoint
(5) A successful transfer is indicated
by the waypoint data in both the
GPS data block on the lower left
and the tactical waypoint data
block on the lower right are the
same
E. Set navigation source 2.7.5.1.1.1
1.
The navigation source TCN, VOR or WYPT
must be selected on the HSI display (VOR
is not a selection option with PLAN
selected)
2.
When course and a navigation source are
selected the bearing pointer and a course
line are displayed on the HSI and the
steering arrow is shown on the HUD
3.
Command course and heading: the
command course and heading can be set
either with the increment decrement push-
buttons on the HSI display or with the
buttons on the DEP
4.
Compass rose scale: There are five scales
10, 20, 40, 80, and 160 miles with each
depression of the scale push-button the
compass rose scale decreases
Page 3-8
(10-99) Original
Previous Page
