T-45C TS
CR-02; ADV & IUT
CR-01
Course Rules
(2) Enter a 5 NM initial at 1500 MSL on the
extended centerline of the assigned runway
b.
OVERHEAD APPROACH (standard BREAK,
normal recovery at Meridian)
(1) Report a 5 NM Initial at 2500 MSL and
lined up on non-pattern side of the landing
runway (max offset 500 laterally)
At pilot/flight leaders discretion, request a
SHORT INITIAL from Tower on initial
contact. If approved, enter a 3 NM initial at
2500 MSL (2200 AGL)
(2) At 5 NM begin descent to 1400 MSL.
Report the Numbers and execute a level
BREAK; Left pattern for left runways, right
pattern for right runways (or as Tower
directs)
(3) Established on downwind, descend to 900
MSL (600 AGL)
Sg 5, fr 2B1
Fig 35: Meridian
Landing Pattern
Figure 35: MERIDIAN LANDING PATTERN
Original (05-98)
Page 1-53