UJPT, E2-C2, ADV, & IUT RIFP-01
Introduction to Radio Instruments
Sg 4, fr 2
Sg 4, fr 3
INTRODUCTION TO RADIO INSTRUMENTS
GROUND SPEED X 1% = DME TO ARC LPT
(USING 1/2 SRT)
*
SID procedures
*
Radial intercept procedures
*
Indications of station passage
INBOUND - ADD 1% of GS to the arc DME
*
TACAN/VOR DME arc procedures
OUTBOUND - SUBTRACT 1% of GS from the
*
Voice Procedures
arc DME
*
Ground speed computation procedures
*
Wind drift correction procedures
*
Pt-to-Pt procedures
*
Direct to a NAVAID
*
VOR-TACAN/VOR DME holding procedures
RADIAL TO ARC LPT CALCULATION
Sg 4, fr 4, pg 1
Sg 4, fr 4, pg 2
13
12
11
10
13
12
11
10
10 DME Arc
10 DME Arc
Lead Point DME
300 KGS
300 KGS
1/2 SRT
1/2 SRT
1% GS = Radius of Turn
1% GS = Radius of Turn
RADIAL TO ARC INTERCEPT PROCEDURE
RADIAL TO ARC INTERCEPT PROCEDURE
IV. Flying TACAN/VOR DME arc 2.7.5.1.4.1
A.
Intercepting an arc from a radial lead point calculation
1.
For a 90-degree intercept: approximately 1% of ground
speed = DME lead point using 1/2 SRT
2.
For intercepts of less than 90 degrees: use a proportional
distance lead point of less than 1%
(8-97) Change 1
Page 1-13