ONFP-03
Review of the ONav FTI
e.
Perform all actions required over/immediately
after checkpoint
(1) Turn
(2) Check time
(3) Check fuel
(4) Check engine instruments
(5) Initiate corrections
II.
Determination of position 1.7.7.4.4
Sg 2, fr 2
Lesson Organization
?
What are the primary instruments used to determine
position on the low level route?
ANSWER: The elapsed time clock and HSI
A.
Use elapsed time for on-course locations
1.
Use compass for heading
2.
Use clock for elapsed time
B.
Go from clock to chart to ground to locate course along
Sg 15, fr 1
ground
Low-Level Route
Video Menu
1.
Locate landmark in conjunction with elapsed time on
chart then look for it on the ground
a.
Determine position between two landmarks, in
conjunction with elapsed time
b.
Estimate distance to nearby landmark off
wingtip
(11-95) Original
Page 3-6
Previous Page
