UJPT, E2-C2, ADV, & IUT EMFP-03
Engine and Hydraulic Emergency Procedures
d.
Possible fire or smoke
2.
Procedures - See NATOPS
I.
Tailpipe hot (in flight) 1.8.1.1.3.2
Sg 3, fr 15, 16
Tailpipe Hot
NOTE: The tailpipe hot sensor element is located in the
tailpipe bay aft of the engine compartment and firewall.
an indication of a tailpipe bay fire. Immediate implemen-
tation of the tailpipe hot procedures and proper monitor-
ing for secondary indications is essential for proper
handling of this problem.
1.
Indications:
a.
MSTR ALERT light flashes and warning/caution
tones sound
b.
TAILPIPE HOT caution light illuminates
2.
Procedures - See NATOPS
PROGRESS CHECK
Question 6 -- 1.8.1.1.5.1
What are the indications of an engine stall?
ANSWER:
1. Loud banging or popping noises
2. Increasing EGT
3. Decreasing or fluctuating rpm
Question 7 -- 1.5.3.1.5.7.2
What fuel control mode should you select during relight if
you suspect main engine fuel system failure?
ANSWER: MANUAL
Page 3-20
(9-98) Original