T-45C TS, ADV & IUT ONFP-01
Low Level Waypoint Navigation
d.
Select desired waypoint with waypoint selector box control
arrows
e.
Select XFER to transfer the waypoint data from the MDL to
the DEU
f.
Successful transfer indicated by waypoint data in the GPS
data block and waypoint data block are the same
3.
Waypoint programming
4.
Only required if waypoints are used for navigation
5.
Waypoints entered on the DATA display
6.
Waypoints programmed manually or transferred from Mission
Data Loader (MDL)
7.
Manual waypoint programming
a.
From waypoint DATA display
b.
Select tactical waypoint
c.
Enter waypoint data
(1)
Select LAT, LONG, ELEV or MVAR
(2)
Enter desired data using HUD DEP and press ENT to
enter data into the DEU
(3)
Repeat for other waypoint parameters
8.
Transfer waypoint data from MDL
a.
From GPS DATA display
b.
MDL stores up to 200 waypoints
c.
Select GPS data page containing desired waypoint
d.
Place GPS selector box over desired waypoint
e.
Select XFER to transfer waypoint data from the MDL to the
DEU
C.
Waypoint sequencing -- used for AUTO sequential waypoint steering
1.
Maximum of 10 waypoints can be programmed
2.
Waypoint sequencing data entry
(4-03) Original
Page 1-7
Previous Page
