T-45C TS & ADV BIFP-08
GCA/ILS Procedures
3.
Base leg
a.
Procedure
(1) Maintain assigned base leg
altitude
(2) Transition to landing
configuration––gear and flaps/slats
down
NOTE: 1/2 flaps may be used
unless full flap landing planned.
(3) Perform landing checklist
(4) Maintain 150 KIAS until within
10 nm and 30 degrees of final
approach course (FAC), then slow
to on-speed
(5) Do not slow below 150 KIAS until
landing checklist is complete
b.
Control
(1) Establish a 30-degree AOB turn
COMMON ERROR: Not
performing a 30-degree AOB turn
in pattern.
(2) Lower gear and full flaps/slats
(3) Perform landing checklist
(4) Correct nose attitude for resultant
lift change from flaps/slats
(5) Establish a nose attitude reference
and power setting for level flight at
150 KIAS
(4-01) Original
Page 8-9
Previous Page
