T-45C TS, ADV & IUT EMFP-04
Engine and Hydraulic Emergency Procedures
I.
Tailpipe hot (in flight) 1.8.1.1.3.2
Sg 3, fr 16
Tailpipe Hot
(1 Overlay)
NOTE: The tailpipe hot sensor element is located in the
tailpipe bay aft of the engine compartment and firewall.
The illumination of the TP HOT caution light may be an
indication of a tailpipe bay fire. Immediate implementation
of the tailpipe hot procedures and proper monitoring for
secondary indications is essential for proper handling of
this problem.
1.
Indications:
Overlay 1
a.
MASTER ALERT light flashes and warning/
caution tones sound
b.
TP HOT caution light illuminates
2.
Procedures - See NATOPS
PROGRESS CHECK
Question 6 -- 1.8.1.1.5.1
What are the indications of an engine stall?
ANSWER:
1. Loud banging or popping noises
2. Increasing EGT
3. Decreasing or fluctuating rpm
Question 7 -- 1.5.3.1.5.7.2
What fuel control mode should you select during relight if
you suspect main engine fuel system failure?
ANSWER: MANUAL
Original (9-98)
Page 4-25
Previous Page
