T-45C TS, ADV & IUT EMFP-04
Engine and Hydraulic Emergency Procedures
d.
Assisted airstart procedures - See NATOPS
LESSON NOTE
Discuss with the class how the GTS is used in all airstart
procedures. Point out that the difference between the use of the
GTS in the Assisted airstart and the other start procedures is that
the Assisted airstart actively uses the pressurized GTS turbine air
to turn the starter and crank the engine.
e.
Successful airstart procedures - See NATOPS
E.
Engine vibrations 1.8.1.1.10.2
1.
Indications
NOTE: Vibration may be associated with the engine,
accessories, airframe, landing gear, pressurization, or
RAT.
a.
Rumbling noise
b.
Vibrating airframe
2.
Procedures - See NATOPS
Sg 3, fr 10
Oil System Failure
F.
Oil system failure 1.8.1.1.16.2, 1.9.3.1.3.2
(1 Overlay)
1.
Indication
a.
MASTER ALERT light flashes and warning tone
sounds
b.
OIL PRESS warning light illuminates
c.
Possible aircraft vibration if malfunction
associated with bearing failure
Overlay 1
d.
Possible engine overtemp
Original (9-98)
Page 4-23
Previous Page
