Display System (HUD)
T-45C TS, ADV, & IUT CO-04
d.
VOR -- VOR steering
e.
ILS -- ILS only steering
f.
TILS -- TACAN and ILS steering
g.
WILS -- Waypoint and ILS steering
h.
OILS -- Waypoint offset and ILS
steering
3.
Distance and time-to-go resolution is
commensurate with information displayed
on the HSI
K. Situation steering arrow and reference dots
1.
Displayed when TACAN, waypoint, or
waypoint offset is the selected steering
source and course (CRS) is selected on the
HSI
2.
Each reference dot represents 5 degrees of
course deviation with TACAN steering
3.
Each reference dot represents 2 nm gear
up, or 0.15 nm gear down, cross track
deviation with waypoint or waypoint offset
steering
4.
The reference dots are removed when the
deviation from the selected course is with 1
degree with TACAN selected of .4 nm gear
up, 0.03 nm with gear down with waypoint
or waypoint offset selected
L.
ILS needles
1.
Displayed whenever ILS is selected
steering and an ILS signal is received
2.
Needles are referenced to the velocity
vector and scaling is commensurate with
the scaling on the ADI display
(10-99) Original
Page 4-7
Previous Page
