T-45A UJPT, E2-C2, & ADV CR-02; IUT CR-01
Course Rules
2.
Overhead approaches
Sg 6, fr 4, 5, 6, 7
Fig 32, 33, 34, 35:
NOTE: (Standard BREAK, normal recovery at
Overhead Approach
Kingsville) Report a 5-nm initial at 2,500 ft MSL
(advise tower if full-stop), and line up on pattern side
of the duals so as not to break over the runway (max
offset 500 ft laterally). At pilot/flight leader's
discretion, request a low initial from approach control
on initial contact. If approved, enter a 5-nm initial at
1,100 ft MSL (1,050 ft AGL). Otherwise, descend at
4 nm to 1,100 ft MSL. Report the "Numbers" and
execute a level BREAK: left pattern for runways 13,
17, 31, and 35 (or as tower directs). Established on
downwind, descend to 600 ft AGL (650 ft MSL) and
report "Abeam" with intentions.
a.
Standard break (normal recovery at Kingsville)
(1) Report "initial" at 5 nm, 2,500 ft MSL or "low
initial" at 5 nm and 1,100 ft MSL (advise
tower if full-stop)
(2) Lined up on pattern side of duals, (left of
the left runway - max offset 500 ft laterally)
(3) At 4 nm, commence descent to 1,100 ft
MSL
(4) Report "numbers" and execute level break
first two-thirds of runway length or as
directed by tower
(a) Left pattern for runways 13, 17, 31,
and 35
(b) As tower directs
NOTE: Do not break over the runways at NQI!
(5) Established on downwind, descend to
600 ft AGL and report "abeam" with
intentions
Page 2-64
(3-03) Original
Previous Page
