T-45A UJPT & E2-C2 INav-10
Flight Planning (En Route)
ITEM 23 - Do not make an entry in the ACTUAL DEP TIME and BASE OPERATIONS USE blocks.
N/A
1 + 45
NBG
0 + 15
103-3
163610/TW2/NQI
N/R
I. M. SMART
Figure 12: DD-175 SECTION IV - COMPLETED EXAMPLE
PROGRESS CHECK
Question 4--2.1.9
What format is used to enter the total time for the FUEL ON BD block?
ANSWER:
Complete Section V
ITEM 24 - Enter the symbol for the DUTY to be performed by each member listed, as defined by
appropriate service directives. For formation flights, identify the crew duty symbol and position of the
aircraft in formation.
EXAMPLE: CP—Copilot; P/2—Pilot of the number two aircraft in formation; CP/2—Copilot of the number
two aircraft in formation
ITEM 25 - For NAME AND INITIALS, the name of the pilot-in-command must appear in the first block of
the crew list; names of all crew members may be listed separately and attached to the flight plan.
ITEM 26 - Enter the appropriate military rank or suitable civilian classification in the RANK block.
ITEM 27 - Next, enter the SSN (social security number) for each crew member (optional).
ITEM 28 - Last, in the ORGANIZATION AND LOCATION block, enter the organization of each individual
crew member and the location of his/her organization, using a 3-letter location identifier. Enter the
installation name if there is no location identifier.
NOTE: If the crew is composed of members from different military services, identify the branch in
parentheses after the location, i.e., (USMC) or (USN).
(6-99) Original
Page 10-13