UJPT, E2-C2, ADV, & IUT EMFP-03
Engine and Hydraulic Emergency Procedures
c.
HYD 2 PRESS caution light illuminated
d.
Emergency Hydraulic system pressure (HYD 2
pressure gauge) less than 600 psi
e.
HYD FAIL warning light illuminated
Sg 2, fr 19
HYD FAIL warning
NOTE: The HYD FAIL warning light will
light circuitry
illuminate with the HYD 1, HYD 2, and
emergency HYD system failure. For the HYD
FAIL warning light to illuminate, HYD 1 system
pressure must be less than 600 + 50 psi, HYD 2
system pressure less than 1,660 + 110 psi and
the emergency HYD system pressure must be
less than 600 + 50 psi.
2.
Procedures - See NATOPS
E.
Uncommanded RAT extension 1.8.1.5.2.2
Sg 2, fr 20, 21
Uncommanded RAT
1.
Indications
Extension
a.
MSTR ALERT light flashes and caution tone
sounds
b.
RAT EXTEND caution light illuminates
c.
HYD 2 pressure is normal, and HYD 2 PRESS
caution light is not illuminated
NOTE: The RAT should extend only when
HYD 2 pressure drops to approximately
1,500 psi. The HYD 2 PRESS caution light
should illuminate at 1,660 + 110 psi, before the
RAT extends.
2.
Procedure - See NATOPS
Page 3-12
(9-98) Original
Previous Page
