UJPT, E2-C2, ADV, & IUT EMFP-05
Canopy and Flight Control Emergency Procedures
b.
Trim failure
Sg 2, fr 9
Standby Stabilator
(1) Stabilator position indicator needle fails to
Trim
move with trim inputs
(2) Fails to respond to stabilator trim inputs
3.
Rudder 1.8.1.6.1.1
Sg 2, fr 10, 11
Runaway Rudder Trim
a.
Runaway trim
(1) Rudder pedals fully deflected
(2) Uncommanded yaw (slip indicator off
center)
(3) Yaw-induced roll
(4) Rudder trim position indicator left/right
b.
Trim failure
(1) Fails to respond to trim inputs
(2) Rudder trim position indicator fails to move
B.
Procedures - See NATOPS 1.5.4.7.2, 1.8.1.6.4.2,
1.8.1.6.5.2, 1.8.1.6.7.2, 1.8.1.6.1.2, 1.8.1.6.6.2
NOTE: Changes in airspeed may be required to
maintain control in a runaway trim condition. With the
exception of runaway nosedown trim, reducing airspeed
will provide improved controllability.
Page 5-6
(9-98) Original
Previous Page
