Hydraulic Subsystems
T-45A UJPT, E2-C2, ADV, & IUT Eng-13
(2) Purpose: illuminates when selected
hook position does not match actual
hook position (e.g., HOOK DN
selected but hook remains up)
NOTE: The HOOK light will be on
during the transition time between
hook up and down. When down is
selected, hook must reach full
extension for light to go out.
c.
HOOK BYPASS switch
NOTE: The HOOK BYPASS switch
does not affect the operation of the
arresting hook. Instead, it controls the
operation and function of the AOA
indexer lights and approach lights,
which serve as a reminder to lower the
hook during arrested landings.
(1) Location: right console, fwd
cockpit only
(2) Purpose
(a) When set to CARRIER, AOA
indexer lights and approach
lights flash when aircraft is in
landing configuration and
hook is not down
(b) When set to FIELD, above
function is bypassed and
lights are steady
(8-03) Original
Page 13-44
Previous Page
