Weapons
Practice Ordnance
VCR SETUP
1.
Place the entire sealed video module in the video interface module (VIM) located in the aft cockpit,
right console, and secure it with the locking bar. Then place the aft cockpit VCR switch in STBY or
OFF as briefed.
2.
Check that the forward cockpit VCR switch is set according to instructions: ON, VCR starts record-
ing; OFF, VCR operation is controlled by the aft cockpit; AUTO, VCR starts recording when the
master armament switch is set to ARM.
Page 8
(4-03) Original
Previous Page
