CNATRAINST 1542.152A
27 February 2004
BEHAVIOR STATEMENT
STANDARDS
9. Departure
● Begins when climb
● Complies with ATC/SID/flight plan
airspeed is
clearance or course rules, as
established and ends
appropriate.
when SID/published
departure is complete
or established in
assigned working area.
● If no published
departure, begins when
initiating pitch
change for level-off.
10. SSE at Altitude
● Executes maneuver IAW NATOPS and
● Begins with initial
FTI procedures.
pitch and power
setting and ends when
aircraft is stabilized
in straight-and-level
flight, on climb
profile (Vx or Vy), or
in position for the
next maneuver.
11. Dynamic Engine Cut
● Begins with initial
● Executes maneuver IAW NATOPS and
pitch and power
FTI.
setting and ends when
● Maintains 10 degrees of heading
aircraft is stabilized
and demonstrates appropriate
in straight-and-level
rudder use.
flight, on climb
● No descent below initial altitude,
profile (Vx or Vy), or
and airspeed never below 91 knots
in position for the
(T-44) or 104 knots (TC-12).
next maneuver.
VIII-5