Landing Roll and the After Landing Checklist

CHAPTER ONE

INTERMEDIATE FLIGHT PREPARATION WORKBOOK

Landing Roll and the After Landing Checklist

On touchdown, you are required to call "boards and speed" (e.g., 6 board, 100 knots), until the P

initiates braking action. The P will apply braking at roughly 90 knots. Monitor tower frequency

until clear of the active runway(s) and clear the aircraft from 9 to 4 o'clock. When clear of all

active runways and directed by Tower, call, "Ground, retract flaps," and initiate the After

Landing Checklist.

Engine Shutdown Checklists

After the brake check has been completed, perform the checklist as prescribed. Exit the aircraft,

do a walkaround inspection, and return to the Ready Room for debrief.

1-10

T-1A OPERATING PROCEDURES