|
| T-45A/C TS, E2-C2, ADV & IUT Aero-06/07
NATOPS Performance Charts / Charts and Exam Review
e.
Extend no wind ground roll line down to
Overlay 3
headwind/tailwind graph
Overlay 4
f.
Parallel headwind or tailwind guideline to
Overlay 5
takeoff wind velocity
Overlay 6
g.
From intersection of takeoff wind velocity and
Overlay 7
ground roll line, project line down vertically to
determine ground roll with wind
Overlay 8
h.
Extend ground roll with wind down to distance
Overlay 9
over 50-foot obstacle graph
Overlay 10
i.
Continue ground roll with wind line down to
Overlay 11
reflector line
Sg 3, fr 5
j.
From intersection of ground roll with wind line
Takeoff Distance
and reflector line project a horizontal line to left
Half Flaps, completed
to determine distance over a 50-foot obstacle
k.
Computing takeoff distance using NATOPS
sample problem
C. Velocity During Takeoff Ground Run (Line Speed)
1.
Used to determine speed to which the aircraft should
Sg 3, fr 6
Velocity During
accelerate in a given distance during takeoff
Takeoff Ground Run
(11 Overlays)
2.
If aircraft does not achieve the calculated, abort
Use the Velocity during Takeoff Ground Run chart to
calculate the line check speed. Enter the chart with
the distance from the commencement of takeoff roll
to the selected object
3.
Line Speed Computation
a.
Enter chart at desired distance down runway
Overlay 1
b.
Project horizontal line from desired distance
Overlay 2
down runway to gross takeoff weight reference
line
(9-99) Original
Page 6-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |