Enter target wingspan on the Data Entry Panel

HUD/MFD Data Entry Procedures

T-45C TS, ADV & IUT TFFP-01

2. Select STRS from the MENU page

3. If the display is not the A/A page select A/A

4. Select WSPN from the stores a/a page (scratch pad on

HUD displays "WS" prompt and initial target wingspan

of 31 ft)

NOTE: The reticle is occulted during data entry.

B. Enter target wingspan on the Data Entry Panel

1. If default wingspan setting (31 ft) is desired, press ENT

key

2. If default wingspan is not desired, then follow these

steps:

a. Enter wingspan of target with DEP keys

NOTE: If you make a mistake, press the CLR key

and reenter wingspan.

b. Press ENT key to enter wingspan value

3. If displayed figure flashes, then value entered is

unacceptable (max wingspan acceptable 120 ft)

a Press CLR key

b Reenter wingspan value

c Press ENT key

4. When wingspan setting is acceptable, press

ENT key (scratch pad display clears and reticle

changes size to reflect entered value)

C. Toggle master armament switch

1. "X" overlay disappears from GUN indicator on HUD

2. Air-to-Air Stores page shows Master Arm status as

ARM

Original (05-98)

Page 1-5