T-45C TS, ADV, & IUT RIFP-02
TACAN and VOR Procedures
B.
Procedures
1.
Preflight and pre-takeoff preparation
a.
Identify frequencies used by ATC and ensure
compatibility with communication equipment
b.
Determine if your aircraft’s performance is
adequate to adhere to all restrictions
c.
Identify routes, altitude, and specific restrictions
NOTE: When accepting a SID, you must com-
ply with all requirements and restrictions unless
ATC amends it.
2.
Changes to clearance
a.
Amendments to initial clearance will be issued
any time ATC deems such action necessary to
avoid possible conflict between aircraft
NOTE: When a SID is changed, confirm what
part of the SID is still in effect.
b.
Cancellation: to reinstate, departure control
must state portion of SID routing that still
applies and restate altitude restrictions
II.
Radial intercepts 2.7.5.1.9.1
A.
Double angle off bow method
1.
Tune and identify station
2.
Set desired course in CRS window
3.
Look from desired course to head of bearing pointer
used and an equal number of degrees beyond (this
is your intercept heading)
4.
Turn aircraft to the intercept heading (max 45
degrees)
(5-99) Original
Page 2-6
Previous Page
