T-45C TS, ADV & IUT EMFP-04
Engine and Hydraulic Emergency Procedures
Figure 5: HYD 1 PUMP FAILURE
2.
Procedures - See NATOPS
C.
HYD 2 EDP failure 1.8.1.5.5.2
Sg 2, fr 8-11
Fig 6: HYD 2 Pump
1.
Indications
Failure (3 Overlays)
a.
Loss of pressure, as indicated by HYD 2
pressure gauge
b.
At 1,660 + 110 psi
Overlay 1
(1) MASTER ALERT light flashes and caution
tone sounds
(2) HYD 2 caution light illuminates
c.
Ram air turbine (RAT) extends at 1,500 psi, and
Overlay 2
HYD 2 pressure cycles between 2,500 and
3,000 psi
Original (9-98)
Page 4-13
Previous Page
