T-45A UJPT, ADV, & IUT TFFP-03
Tactical Formation
d.
Depress DATA key to verify target wingspan setting of
31 ft; use SET DEP key to change wingspan, if required
e.
Set weapons selector to OFF to return HUD to navigation
mode
2.
Pre-firing
a.
Ensure HUD system is operational
b.
Set weapons selector switch on armament control panel to
GUN A/A
c.
Press GUN select button on armament control panel; the
upper half will illuminate amber
d.
Ensure LAC mode displayed in PDU mode indicator
e.
After completing the above steps and immediately prior to
leaving perch, place master arm switch to ARM position
NOTE: Heading, turn airspeed, and bank angle are not
displayed in the air-to-air mode. As you maneuver, you can
use the pitch bars for bank angle reference.
f.
Turn VCR on
(11-98) Original
Page 3-35