ONFP-01
HUD I
c.
Brightness (BRT) control rheostat (dimmer switch)
(1) Purpose: controls relative brightness of the display
(2) Operating characteristics
(a) Range with DAY/AUTO in DAY: 0 to full bright
(b) Range with DAY/AUTO in AUTO: 10% for pilot prefer-
ence; otherwise full automatic
D. Video camera system
1.
Camera head located on pilot's display unit
2.
Camera electronics located in nose bay
3.
Video cassette recorder located in aft cockpit
4.
Records pilot's view through HUD
5.
Video system controls
Fig 2: HUD Controls
a.
Video recorder (VCR) switch
(1) Location: top left instrument panel in forward cockpit
(2) Purpose: operates camera
(3) Operating characteristics
(a) OFF: video camera is controlled from aft cockpit
(b) ON: turns camera on to run continuously
( c ) AUTO: turns camera on whenever master armament
switch is set to ARM.
b.
Video cassette recorder switch
(1) Location: on VCR in aft cockpit
(2) Purpose: operates camera
(3) Operating characteristics
(a) OFF: video is controlled from forward cockpit.
Approximately 10 second delay to record
(b) STDBY (standby): video in "pause" mode.
Approximately 2-3 second delay to record
( c ) RECORD: starts continuous recording
(11-95) Original
Page 1-4
Previous Page
