Out-of-Control Flight
T-45A UJPT, E2-C2, ADV, & IUT OCFFP-01
8.
Attempt to return to level flight by inputting
Sg 2, fr 5, p 8
full rudder in opposite direction
HIGH AOA/DEEP STALL
D.
Recovery procedures
ENTRY PROCEDURES
1. Perform stall/departure
1.
Perform OCF procedures
checklist
2. Set power to IDLE rpm
2.
Recover at 150 KIAS
and maintain altitude with
pitch;
do not trim past 150 KIAS
3.
Ensure OIL PRESS light is out and add
power
3. As AOA increases beyond
20 units, note amount of
buffet and wing drop
4. Note wing drop occurs
with very little warning at
23-25 units AOA
5. Increase AOA to 28-30
units
6. With stick pulled fully aft,
note sink rate and attitude
7. Maintain full back stick
and input half rudder
deflection
in one direction to achieve
greater than 30 degrees
AOB
8. Attempt to return to level
flight by inputting full
rudder in opposite
direction
Sg 2, fr 6
RECOVERY PROCEDURES
1. Perform OCF procedures
2. Recover at 150 KIAS
3. Ensure OIL PRESS light is
out and add power
(9-98) Original
Page 1-16
Previous Page
