UJPT BIFP-07, E2-C2 & IUT BIFP-03
GCA Procedures
D.
Check minimums for weather and determine DH (MDAs for back up
approaches)
NOTE: Adjust DH as required for 200 ft HAT minimum.
E.
Estimate initial rate of descent required
1.
To maintain glidepath on PAR
2.
To reach MDA prior to MAP on ASR
3.
Rate of descent will vary for different glideslope angles and ground
speeds
a.
Check radar instrument approach minimums in front of FLIP
(Terminal) for glideslope angle
b.
Estimate ground speed by applying estimated wind factor to IAS
computed for weight & configuration
c.
Check inside back cover of FLIP (Terminal) for rate of descent table
F.
Slow to 200 KIAS prior to GCA pattern entry
(03-97) Original
Page 7-4