T-45A UJPT & E2-C2 ASI-05, IUT ASI-02
TIS Orientation
2.
Enter the desired SSN, “Schedule name,” or last name in the appropriate
space, and then press <Next Screen>.
3.
Press <PF3>, highlight “ADD,” and press <Return>. The “ADD” window
should appear at the bottom of the screen.
4.
Enter the required information in each space and tab to the next until the
“ADD” window is complete. (Note: If it is a single snivel, enter “S” under
type. If it is a periodic snivel, enter “P” under type. For periodic snivels,
enter “Day of Week” field.)
5.
After the snivel data is entered, press <Do>. Press <Previous Screen>
to remove the “ADD” window. Press <F18> to save new snivel
information. Finally, press <F20> to exit.
D. To delete a snivel:
1.
The snivel log “ACTION MENU” will appear defaulted to the “ENTER/
UPDATE” mode. Simply press <Return>, followed by <Do> when
prompted.
2.
Enter the desired SSN, “Schedule name,” or last name in the appropriate
space, and then press <Next Screen>.
3.
Use the arrow keys to highlight the snivel you want to delete. When the
desired snivel is selected, press <PF3>, highlight “delete,” and press
<Return>.
4.
When asked, “Are you sure you want to delete this entry?”, press <Y>.
The snivel should disappear from the screen.
5.
To delete additional snivels, repeat steps 1-4. When finished, press
<F18> to save changes.
E. To modify a snivel:
1.
The snivel log “ACTION MENU” appears defaulted to the “ENTER/
UPDATE” mode. Press <Return>, followed by <Do>.
(11-97) Original
Page 5-13
Previous Page
