CNATRAINST 1542.152A
27 February 2004
BEHAVIOR STATEMENT
STANDARDS
32. SSE Landing Pattern
● Begins when initiating
● Complies with NATOPS and FTI
closed traffic, wings-
procedures.
level on downwind leg
● Maintains +5/-0 knots of FTI
at pattern altitude,
established pattern airspeeds
or established on
prior to threshold. Arrives at
straight-in final.
threshold +10/-0 knots of VREF
speed.
● Ends at landing phase
or when adding power
● Maintains altitude 50 feet of FTI
for waveoff.
requirements throughout pattern.
33. Landing
● Begins when crossing
● Dual Engine: Arrives at threshold
the threshold or
+5/-0 knots of VREF speed.
initiating the
● SSE: Arrives at threshold +10/-0
roundout, whichever
knots of VREF speed.
occurs first.
● Touches down in the prescribed
● Ends when slowed to a
landing zone.
safe taxi speed or
● Lands and maintains within
when advancing power
10 feet of runway centerline.
for touch-and-go
● Touches down <300 feet/min.
takeoff.
34. Touch and Go
● Accomplishes IAW NATOPS and FTI.
● Begins when advancing
power after landing.
● Maintains runway centerline
● Ends when aircraft is
10 feet.
safely airborne, gear
and flaps are
retracted (if
appropriate), and
appropriate airspeed
is established.
35. SSE Full Stop
● Performs maneuver IAW FTI.
● Begins at touchdown on
the runway and ends
● Maintains centerline 25 feet.
when the aircraft has
come to a slow taxi
speed on the runway.
VIII-12