CNATRAINST 1542.145
8 December 2004
BEHAVIOR STATEMENT
STANDARDS
9. Departure
● Begins when climb
● Complies with ATC/departure/
airspeed is
flight plan clearance or course
established and ends
rules, as appropriate.
when published
departure is
complete or
established in
assigned working
area.
● If no published
departure, begins
when initiating
pitch change for
level-off.
10. SSE at Altitude
● Begins with initial
● Executes maneuver IAW NATOPS and
pitch and power
FTI procedures.
setting
● Ends when aircraft
is stabilized in
straight-and-level
flight, on climb
profile (Vx or Vy),
or in position for
the next maneuver.
11. Dynamic Engine Cut
● Begins with initial
● Executes maneuver IAW NATOPS and
pitch and power
FTI.
setting.
● Maintains 10 degrees of heading;
● Ends when aircraft
demonstrates appropriate rudder
is stabilized in
use.
straight-and-level
● Does not descend below initial
flight, on climb
altitude, and airspeed is never
profile (Vx or Vy),
below 104 knots (TC-12B).
or in position for
the next maneuver.
VIII-5
Previous Page
