CNATRAINST 1542.140C
25 JUN 2003
BEHAVIOR STATEMENT
STANDARDS
10.
Blindfold Cockpit Check (Continued)
MAGNETIC (WET) COMPASS--POINT TO
►
IT.
LANDING GEAR POWER AND CONTROL
►
C/Bs--PULL THEM.
LANDING GEAR HANDCRANK--ENGAGE
►
CLUTCH KNOB, TURN HANDLE.
UHF CONTROL PANEL--SELECT "GUARD"
►
CHANNEL.
TRANSPONDER--POINT TO IT.
►
STROBE LIGHT--TURN ON.
►
RMI--POINT TO IT.
►
AVIONICS MASTER SWITCH--CYCLE IT.
►
ANNUNCIATOR PANEL--POINT TO IT.
►
ENGINE AIR BYPASS--PULL HANDLE.
►
ALTERNATE STATIC AIR SOURCE--
►
SWITCH TO ALTERNATE.
11.
Normal Takeoff
● Completes the takeoff checklist.
● Perform takeoff,
starting with
● Checks instruments at 500 ft-lbs.
clearance for takeoff
● Applies appropriate crosswind
and ending with
controls.
● Maintains runway centerline within
retraction.
10 feet.
● Rotates to proper takeoff attitude
approaching 80 KIAS.
● Transitions to cross-check scan.
12.
Departure
● Perform VFR, IFR, or
● Complies with controller
simulated IFR
instructions or departure
departure.
procedure.
13. Trim
● Properly trim the
● Trims in the correct sequence:
aircraft as required
rudder, elevator, and aileron.
by changes in
airspeed, power, or
configuration.
VIII-6
Previous Page
