T-45C TS, ADV & IUT ENG-11
Hydraulic Subsystems
2.
Controls and indicators 1.4.13.3
Sg 2, fr 17
a.
Arresting HOOK handle
Fig 22: Arresting
Hook System Controls
and Indicators (FWD
(1) Location: right instrument panel, both
Cockpit)
cockpits
(2) Purpose
(a) Extends hook when pushed down
(b) Retracts arresting hook when pulled up
(handle is normally in up position)
(c) Fore and aft handles are intercon-
nected and move together
b.
Arresting HOOK warning light (RED)
(1) Location: caution advisory panel, right
instrument panel, both cockpits
(2) Purpose: illuminates when selected hook
position does not match actual hook
position (e.g., HOOK DN selected but hook
remains up)
NOTE: The HOOK light will be on during
the transition time between hook up and
down.
c.
HOOK BYPASS switch
NOTE: The HOOK BYPASS switch does not
affect the operation of the arresting hook.
Instead, it controls the operation and function of
the AOA indexer lights and approach lights,
which serve as a reminder to lower the hook
during arrested landings.
(1) Location: right instrument panel, below
pitot heat switch, fwd cockpit only
(2) Purpose
(9-98) Change 4
Page 11-45
Previous Page
