|
| SNFO/SWSO VOICE COMMUNICATIONS
CHAPTER TWO
Figure 2-2 Approach Plate
201. FREQUENCIES
In the approach plates and SIDs, applicable frequencies are normally listed in the upper left hand
corner of the chart (Figure 2-2).
202. AUTOMATIC TERMINAL INFORMATION SERVICE (ATIS)
1. ATIS provides continuous broadcast of recorded non-control information in selected
terminal areas. Its purpose is to improve controller effectiveness by automating the repetitive
transmission of essential but routine data such as:
a.
Information letter/Time of report
b.
Ceiling
c.
Visibility
GROUND AND VFR COMMUNICATIONS
2-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |