Enabling Objectives

CHAPTER ONE

INSTRUMENT FLIGHT RULES WORKBOOK

1.2.7 State the airspace and altitude where all aircraft are required to have transponders with

mode C equipment.

1.2.8 List the operation procedures for the transponder installed in the T-34C.

1.2.9 State the functions and special codes of a transponder.

1.3.1 Identify an aircraft's position from information presented on the RMI.

1.3.2 Identify the parts displayed on the face of the Radio Magnetic Indicator.

1.3.3 Identify radials and bearings as displayed on the Radio Magnetic Indicator.

1.3.4 Determine courses to be dialed into the Course Indicator.

1.3.5 Determine if the aircraft is left or right of the selected course.

1.3.6 Determine the aircraft's heading relative to the selected course.

1.3.7 Determine if the selected course will take the aircraft to or from the navigational facility.

1.3.8 Determine requirements for RAIM.

1.3.9 Identify satellite requirements for GPS operations.

1.4.0 State the model GPS is based on for navigational use.

1-2 INTRODUCTION TO AIRBORNE NAVIGATION AND COMMUNICATIONS

EQUIPMENT AND PRINCIPLES OF OPERATION