 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  T-45C TS & ADV BIFP-03
Instrument Turns
PRESENTATION
I.
Normal turns 2.7.1.1.2.2
A. Procedures
1.
If heading change is less than 30 degrees, use AOB
equal to the number of degrees of heading change
2.
If heading change is 30 degrees or greater, use
AOB of 30 degrees
B. Control
1.
Adjust attitude as necessary
a.
Roll-in: decreasing vertical component of lift
may necessitate AOA increase
(1) Anticipate need for power with increased
AOB
(2) Steeper bank requires additional power
b.
Roll-out: increasing vertical component of lift
may necessitate AOA decrease
C. Scan
1.
Used to have to scan gauges at various positions in
cockpit. Prior to use of multifunction displays
(MFDs), scanning involved shifting attention
between gauges located at different points on the
instrument panel
2.
Different flight phases require different cross-check
patterns
3.
Scanning is an acquired skill
(8-99) Original
Page 3-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals