HSI (magnetic heading)

Introduction to Basic Instruments

T-45C TS & ADV BIFP-02

2. Standby turn and slip indicator

a. Location: left side of the instrument panel

b. Purpose: Standby turn and slip indication and cross-

check of the turn and slip indication on the ADI display

F. HSI (magnetic heading)

1. Location: normally on the right MFD

2. Purpose:

a. Used as secondary heading instrument

b. Used to cross-check ADI heading information

G. Standby compass

1. Location: center of canopy above windshield

2. Purpose:

a. Displays magnetic heading

b. Used when ADI and HSI heading inoperative

c. Used as cross-check for ADI and HSI heading

H. Angle of attack

1. Angle of attack indication

a. Location: on the ADI display

b. Purpose:

(1) Read primarily to set specific performances

parameters

(2) Shows angle of attack regardless of weight,

g-load, and lift configuration

Page 2-8

(8-99) Original