 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|  T-45C TS, ADV & IUT ACMFP-01
Introduction to ACM
e.
AOA — units, not degrees
f.
Altitude — only digitial read-out
(1) MSL
(2) Radar AGL
g.
G-loading
(1) Instantaneous — reading varies with
aircraft G-loading
(2) Peak G indication — displayed when
exceeding +4.0 G threshold. Declutter
level-1 removes the peak G indication
and the G threshold is reset to +4.0 G
2.
Navigation — sparse information on HUD
NOTE: Navigation within training areas can be
facilitated by setting a series of waypoints to
define boundary limits; especially helpful in
absence of ground references at night, over
water, and above undercasts. Waypoint
outlines and aircraft position can be easily
monitored on the HSI's PLAN display. If air-to
air TACAN is used, distance and bearing
information to homeplate may be obtained by
using the waypoint to homplate. The HUD will
display either TACAN or waypoint steering
distance
a.
Waypoint — may be set to any desired
location (homeplate, alternate, mission
destination, etc.)
b.
A/A TACAN — a helpful inflight assist
(formation, ACM, etc.) and debriefing aid
(1) ETE to steering point is not displayed
in air-to-air mode
(05-98) Change 1
Page 1-32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals