T-45A UJPT, E2-C2, & ADV ASI-07; IUT ASI-04
Introduction to IFT
f.
Malfunctions: an extensive repertoire of
malfunctions can be exercised, from minor
irritations to irrecoverable failures that force
student to make an ejection decision
IV. Setup of simulators for practice
Sg 4, fr 1
Lesson Organization
A.
Setup of IFT for unsupervised practice 1.1.3.8
Sg 4, fr 2
1.
Prior to flight
Fig 14: Left and
Center Control Panels
a.
Center control panel, press L CRT MENU
button
b.
Left control panel
(1) Freeze> ON
(2) L CRT> PRESS
Sg 4, fr 3
Fig 15: Master Menu
(3) 1> ENTER
(4) Select IC SET (middle of MOA - #5, 4 nm
Sg 4, fr 4
west of WAADE - #9
Fig 16: Initial
Conditions Index
(5) 53> ENTER (standby)
c.
While trainer is initializing:
Sg 4, fr 5
Fig 17: Initial
(1) Turn on SAHRS, BATTS, TAC/VOR (and
Conditions Set Nine
set CHNL/FREQ)
(2) Check positions of gear, flap, emergency
fuel shutoff, and parking brake handles
d.
Freeze> OFF
2.
When done with trainer:
a.
Shut BATTS off before leaving cockpit
Sg 4, fr 6
Fig 14: Left and
b.
Left control panel:
Center Control Panels
(1) Freeze> ON
(11-97) Original
Page 7-27